FURNACE REPAIR & TUNE-UPS
IN RALEIGH, NC

Furnace Maintenance For Your System in Raleigh

Consider furnace maintenance like regular maintenance and checks for your cars and vehicles. Every 3-5 thousand miles you usually take your car in to get an oil change and check up, if you didn't then it probably wouldn't last too long. While furnaces don't run on the same maintenance interval as a vehicle - it's recommended to get a professional tune-up every year or so to keep your furnace in optimal condition. The exact process for your furnace maintenance will vary slightly based on unit type and condition but you can expect it to follow along with these steps:

• Inspection When we arrive, we will carefully inspect your gas furnace before noting its condition.
• Cleaning If you have a replaceable furnace filter we'll change it. If you have an electronic air cleaner or other IAQ systems we'll inspect it and clean the airstream components as needed. We'll also clean the furnace blower and control compartment.
• Lubrication We will lubricate the moving parts to reduce friction and prevent noise.
• Check Ignition System The technician will inspect and clean the pilot light assembly or ignition system, as needed.
• Gas Pressure and Burner Verify proper gas pressure, inspect and clean the burners.
• Blower We will inspect and clean the air blower, if required. We will check the amperage for the fan motor to ensure its condition is in good shape.
• Heat Exchanger Examine heat exchanger in gas furnace for cracks, soot, and corrosion.
• Venting System Inspect the flues and ventilation systems to ensure proper operation. If you have a condensing furnace, we will check the condensation drains and any condensation pumps.
• Ductwork Check ductwork for loose joints or hangers, and seal with mastic duct sealant as needed.
• Temperature Controls We'll check you thermostats for proper operation. If they utilize batteries for power, we'll change the batteries.
• Complete After Maintenance System Test We'll test run your gas furnace for several minutes. We'll check for proper temperature rise, blower operation, and burner operation.
• Clean-up We'll pick-up our tools, remove any old filters, and thoroughly clean our workspace.
• Prepare Visit Report We'll explain our work and document any potential problems or recommended repairs.

Furnace Maintenance For Your System in Raleigh

You need a reliable and professional furnace service contractor, so that when you have an unexpected furnace repair need arise you have someone you can trust to fix your unit. Lots of HVAC and heating contractors in the Wake County area know how to provide repair for your furnace units, but many don't have the level of knowledge and expertise that we do at Eco-Green Air.

Eco-Green Air technicians are insured, well trained and certified. Whether you know you need a large repair for your furnace, or just need something checked that doesn't sound/look quite right we're here to help. We've been assisting with furnace repair, maintenance and new installations in the Raleigh area for over 16 years. We offer free service quotes because we value transparency and reliability. Need furnace repair in Wake County - call our team!